Part Number Hot Search : 
GL711FW TEA1622P 120EIB TDA19989 BA7181FS C1602 AD22A10 LM78L08
Product Description
Full Text Search
 

To Download EL152605 Datasheet File

  If you can't view the Datasheet, Please click here to try to view without PDF Reader .  
 
 


  Datasheet File OCR Text:
 (R)
EL1526
Data Sheet February 11, 2005 FN7405.1
Dual Channel Differential DSL Line Driver for Centillium Maximus CO Chipsets
The EL1526 is to be used with Centillium's Maximus CO chipset for very high performance ADSL applications. The line driver supports use of ADSL downstream spectrum up to 3.75MHz, beyond traditional 1.1MHz range. For the extended spectrum, payload rates up to 50Mbps is achievable in conjunction of High-Bit-Loading (HBL) feature of Maximus CO chipset. This feature allows DMT tones to carry higher than 15 bits per tone, resulting in higher performance ADSL services. The EL1526 is an integral part of the signal chain for HBL. The driver has been optimized for flat gain response and reduced harmonic distortion and noise in the bands of interest to improve the overall signal to noise in the system. A unique internal compensation circuit eliminates the need for external common mode snubber filters in active termination applications. These drivers achieve a total harmonic distortion (THD) measurement of typically -64dB @ 2.2MHz, while consuming typically 5mA per DSL channel of total supply current. This supply current can be set using a resistor on the IADJ pin. Two other pins (C0 & C1) can also be used to adjust supply current to one of four pre-set modes (full-IS, 3/4-IS, 1/2-IS, and full power-down). The EL1526 operates on 5V to 12V supplies and retains its bandwidth and linearity over the complete supply range. The device is supplied in the small footprint (4x5mm) 24-pin QFN package and is specified for operation over the full -40C to +85C temperature range.
Features
* 450mA output drive capability * 44.1VP-P differential output drive into 100 * -85dBc THD @ 1MHz 2VP-P * High slew rate of 500V/s * Bandwidth - 46MHz * Current control pins * Channel separation - 80dB @ 500kHz - 75dB @ 1MHz * Pb-Free available (RoHS compliant)
Applications
* ADSL line drivers for Centillium Maximus CO chipsets
Pinout
EL1526 (24-PIN QFN) TOP VIEW
20 VOUTA 19 VINA18 VINB17 VOUTB THERMAL PAD 16 VOUTC 15 VINC14 VIND13 VOUTD S+ 10 NC 12 NC 11 CD 8 CD 9 24 C1AB 23 C0AB 22 VS21 NC
VINA+ 1 VINB+ 2 GND 3 IADJ 4 NC 5 VINC+ 6
Ordering Information
PART NUMBER EL1526IL EL1526IL-T7 EL1526IL-T13 EL1526ILZ (See Note) EL1526ILZ-T7 (See Note) EL1526ILZ-T13 (See Note) PACKAGE 24-Pin QFN 24-Pin QFN 24-Pin QFN 24-Pin QFN (Pb-Free) 24-Pin QFN (Pb-Free) 24-Pin QFN (Pb-Free) TAPE & REEL 7" 13" 7" 13" PKG. DWG. # MDP0046 MDP0046 MDP0046 MDP0046 MDP0046 MDP0046
VIND+ 7
Get Full Datasheet
NOTE: Intersil Pb-free products employ special Pb-free material sets; molding compounds/die attach materials and 100% matte tin plate termination finish, which are RoHS compliant and compatible with both SnPb and Pb-free soldering operations. Intersil Pb-free products are MSL classified at Pb-free peak reflow temperatures that meet or exceed the Pbfree requirements of IPC/JEDEC J STD-020C.
1
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures. 1-888-INTERSIL or 1-888-352-6832 | Intersil (and design) is a registered trademark of Intersil Americas Inc. Copyright Intersil Americas Inc. 2004, 2005. All Rights Reserved All other trademarks mentioned are the property of their respective owners.
EL1526
All Intersil U.S. products are manufactured, assembled and tested utilizing ISO9000 quality systems. Intersil Corporation's quality certifications can be viewed at www.intersil.com/design/quality
Intersil products are sold by description only. Intersil Corporation reserves the right to make changes in circuit design, software and/or specifications at any time without notice. Accordingly, the reader is cautioned to verify that data sheets are current before placing orders. Information furnished by Intersil is believed to be accurate and reliable. However, no responsibility is assumed by Intersil or its subsidiaries for its use; nor for any infringements of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of Intersil or its subsidiaries.
For information regarding Intersil Corporation and its products, see www.intersil.com 2
FN7405.1 February 11, 2005


▲Up To Search▲   

 
Price & Availability of EL152605

All Rights Reserved © IC-ON-LINE 2003 - 2022  

[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy]
Mirror Sites :  [www.datasheet.hk]   [www.maxim4u.com]  [www.ic-on-line.cn] [www.ic-on-line.com] [www.ic-on-line.net] [www.alldatasheet.com.cn] [www.gdcy.com]  [www.gdcy.net]


 . . . . .
  We use cookies to deliver the best possible web experience and assist with our advertising efforts. By continuing to use this site, you consent to the use of cookies. For more information on cookies, please take a look at our Privacy Policy. X